扫描二维码关注我校“招生办订阅号”，实时了解我校招生相关资讯
| 基本信息： | 汪炳叔（男，中共党员） | |
|---|---|---|
| 所属院系： | 材料工程系 |
|
| 职称： | 教授 | |
| 学历： | 博士研究生 | |
| 学位： | 博士 | |
| 个人简介： | 2000-2004 重庆大学材料科学与工程学院，工学学士/金属压力加工 2006-2012 重庆大学材料科学与工程学院，工学博士/材料科学与工程 2012-2016 福州大学材料科学与工程学院，讲师 2016-2023 福州大学材料科学与工程学院，副教授 2023-至今 福州大学材料科学与工程学院，教授，博士生导师 |
|
| 研究领域： | 微观组织及织构表征技术（EBSD分析技术二次开发） 金属材料（镁合金、钛合金、铜合金、特殊钢、低熔点合金等）塑性变形机理 金属材料加工过程微观组织与织构控制 高纯稀土靶材塑性加工技术 镁/钛合金孪晶及相变晶体学计算，晶体塑性模拟（VPSC） |
|
| 主讲课程： | 毕业论文/设计、材料前沿专题讲座 | |
| 科研成果： | 主持项目： 1. 福厦泉国家自主示范区协同创新项目，高品质特殊钢关键技术及产业化，主持 2. 泉州高层次人才项目，海洋工程用工业纯钛深冷轧制技术研究，主持 3. 长汀金龙稀土合作项目，高纯稀土金属靶材塑性加工技术开发，主持 4. 福建省自然科学基金面上项目，工业纯钛深冷异步轧制孪晶调控机理研究，主持 5. 中国工程物理研究院合作项目，低熔点金属形变及热处理行为研究，主持 6. 中国博士后科学基金一等资助项目，主持 7. 福建省自然科学基金面上项目，基于多向变形的镁合金孪生变体选择机制研究，主持 8. 国家自然科学基金青年项目，基于室温多向高速预变形的镁合金微观组织及织构演变规律研究，主持 参与项目： 1. 国家自然科学基金面上项目，高强韧CNTs/Al复合材料仿生构型设计与制备基础研究，参与 2. 国家自然科学基金青年项目， Cu-Nb微观复合线材的界面行为研究，参与 3. 国家自然科学基金重点项目，时效镁合金的沉淀析出与强韧化机理研究，参与 4. 国家973项目，高性能镁合金材料制备加工中的关键基础问题，参与 发表论文： 部分研究成果已在Acta Materialia、Scripta Materialia、Materials Science and Engineering A等国际学术期刊上发表。迄今为止，已发表SCI论文40余篇。已获授权国家发明专利10项。 （一）镁合金方向论文 1. Bingshu wang*, Yonggan Zhang, Liping Deng, Chen Wang, Junfeng Chen, Yongjian Zhang. An investigation on annealing process and strengthening mechanism of cold rolled Mg-10Li-3Al-2.8Zn alloy. Journal of Alloys and Compounds, 2023, 961:171087. 2. Bingshu Wang*, Jingjing Shi, Peng Ye, Liping Deng, Ning Guo, Chen Wang, Junfeng Chen, Qiang Li. Analysis of {10–12} twinning variants’ selection behavior during multi-directional compression in Mg–3Al–1Zn magnesium alloy. Journal of Materials Science, 2019, 55(13):9797-9808. 3. 邓丽萍, 崔凯旋，汪炳叔*, 等. AZ31镁合金室温多道次压缩过程微观组织和织构演变的研究. 金属学报.. 2019, 55(8):976-985. 4. Bingshu Wang*, Jingjing Shi, Peng Ye, Liping Deng, Chen Wang, Junfeng Chen, Xiaohua Yang, Qiang Li, In-situ investigation on nucleation and propagation of {10-12} twins during uniaxial multi-pass compression in an extruded AZ31 Mg alloy, Materials Science and Engineering: A, 2018, 731: 71-79 5. Jingjing Shi, Kaixuan Cui, Bingshu Wang*, Liping Deng, Chen Wang, Zeren Xu, Qiang Li, Effect of Initial Microstructure on Static Recrystallization of Mg-3Al-1Zn Alloy, Materials Characterization, 2017, 129: 104-113 6. Chen Wang, Hao Ding, BingShu Wang*, Kui Wang, Jingjing Shi, Junfeng Chen, Effects of deformation texture and twins on the corrosion resistance of rolled AZ31 Mg alloy under 5% uniaxial compression, Acta Metallurgica Sinica, 2017, 30: 921-930 7. 汪炳叔*, 邓丽萍, Adrien Chapuis, 郭宁, 李强. AZ31镁合金在平面应变压缩过程中的孪生行为研究. 金属学报.. 2015, 51(12):1441-1448 8. Yao Jinyi, Wang Bingshu*, Deng Liping, Adrien Chapuis, Li Qiang and Liu Qing. Simulation of texture evolution and deformation mechanism in Mg-3Al-1Zn alloy during uniaxial compression. Science China Technological Sciences. 2015: 58(12): 2052-2059 9. Wang Bingshu*, Deng Liping, Adrien Chapuis, Guo Ning, Xu Zeren and Li Qiang. Relationship between textures and deformation modes in Mg–3Al–1Zn alloy during uniaxial tension. Materials Characterization. 2015; 108: 42-50 10. Xin Renlong, Liang Yingchun, Ding Changhong, Guo Changfa, Wang Bingshu, Liu Qing. Geometrical compatibility factor analysis of paired extension twins in extruded Mg–3Al–1Zn alloys. Materials & Design. 2015; 86: 656-663 11. Wang Bingshu*, Deng Liping, Guo Ning, Xu Zeren and Li Qiang. EBSD analysis of {10–12} twinning activity in Mg–3Al–1Zn alloy during compression. Materials Characterization. 2014; 98: 180-185 12. Chapuis Adrien, Wang Bingshu and Liu Qing. A comparative study between uniaxial compression and plane strain compression of Mg–3Al–1Zn alloy using experiments and simulations. Materials Science and Engineering: A. 2014; 597: 349-358 13. Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Strain rate and texture effects on microstructural characteristics of Mg-3Al-1Zn Mg alloy during compression. Scripta Materialia. 2012. 66 (5): 239-242. 14. Wang Bingshu, Xin Renlong, Huang Guangjie and Liu Qing. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression. Materials Science and Engineering A, 2012. 534:588-593. 15. M.Y. Wang, Xin Renlong, Wang Bingshu and Liu Qing. Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling. Materials Science and Engineering A. 2011, 528: 2941–2951. （二）钛合金方向论文 1. Bingshu Wang*, Huimin Liu, Baoxue Zhou, Liping Deng, Chen Wang, Junfeng Chen, Yonghao Zhang. Effect of grain size on twinning behavior of pure titanium at room temperature. Materials Science and Engineering: A, 2021, 2021, 827: 142060. 2 Baoxue Zhou, Rong Yang, Bingshu Wang*, Liping Deng, Yonghao Zhang. Twinning behavior of pure titanium during rolling at room and cryogenic temperatures. Materials Science and Engineering: A, 2021, 803:140458. 3. Peng Ye, Jinyi Yao, Bingshu Wang*, Huimin Liu, Liping Deng, Chen Wang, Junfeng Chen, Qiang Li. A comparative study between {11−22} twinning and {10−12} twinning variant selection mechanisms during uniaxial compression in pure titanium, Materials Characterization, 2020, 162: 110188. （三）铜合金方向论文 1. Mingxue Zhang, Liping Deng, Bingshu Wang, Hongliang Xiang, Effect of torsional rate on the gradient microstructure, texture evolutions and microhardness of pure copper, Materials Characterization, 2020, 161: 110-141. 2. Liping Deng, Bingshu Wang, Ke Han, Rongmei Niu, Hongliang Xiang, Karl T. Hartwig, Xiaofang Yang, Response of microstructure to annealing in in situ Cu–Nb microcomposite, Journal of Materials Science, 2019, 54: 840-850 3. Liping Deng, Zhifeng Liu, Bingshu Wang, Ke Han, Hongliang Xiang, Effects of interface area density and solid solution on the microhardness of Cu-Nb microcomposite wires. Materials Characterization, 2019, 62-66 4. Deng LIping, Wang Bingshu, Xiang Hongliang, Yang Xiaofang, Ke Han. Effect of Annealing on the Microstructure and Properties of in-situ Cu–Nb Microcomposite Wires. Acta Metallurgica Sinica. 2016; 29: 668-673 5. Guo Ning, Song Bo, Yu Hongbing, Xin Rrelong, Wang Bingshu, Liu Tingting. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation. Materials & Design. 2016; 90:545-550. 6. Deng Liping, Han Ke, Wang Bingshu, Yang Xiaofang, Liu Qing. Thermal stability of Cu-Nb microcomposite wires. Acta Materialia. 2015, 101:181-188 （四）特殊钢方向论文 1. Liping Deng, Jian Xia, Bingshu Wang, and Hongliang, Xiang. Effect of Cold Rolling and Subsequent Annealing on the Corrosion Resistance of Ag-Containing CD4MCu Duplex Stainless Steels. Journal of Materials Engineering and Performance. 2023, 32: 1645-1659. 2. Zhimin Zhang, Qingshan Dong, Bo Song, Hong He, Linjiang Chai, Ning Guo, Bingshu Wang and Zhongwen Yao, Effect of Shear Strain Rate on Microstructure and Properties of Austenitic Steel Processed by Cyclic Forward/Reverse Torsion, Materials, 2019, 12: 506 3. Guo Ning, Song Bo, Wang Bing-Shu and Liu Qing. Influence of Torsion Deformation on Textures of Cold Drawing Pearlitic Steel Wires. Acta Metallurgica Sinica. 2015; 28: 707-714 4. Guo Ning, Liu Tingting, Luan Baifeng, Wang Bingshu and Liu Qing. Dislocation density and configuration in fully pearlitic steel during wire drawing. Materials Research Innovations. 2014; 18: s249-254 5. Guo Ning, Luan Baifeng, Wang Bingshu and Liu Qing. Microstructure and texture evolution in fully pearlitic steel during wire drawing, Science China-Technological Sciences, 2013. 56(5): 1139-1146. |
|
| 更新时间： | 2021-12-15 11:07 | |
